Performance Comparison Between Seamless Steel Pipe And Traditional Pipe

 Breaking News
  • No posts were found

Performance Comparison Between Seamless Steel Pipe And Traditional Pipe

September 22
13:32 2022

Under Normal Circumstances, The Steel Pipe Of GB/T8163 Standard Is Suitable For Oil, Oil And Gas And Public Media With Design Temperature Less Than 350℃ And Pressure Less Than 10.0MPa;For Oil And Oil And Gas Media, When The Design Temperature Exceeds 350°C Or The Pressure Exceeds 10.0MPa, The Steel Pipe Of GB9948 Or GB6479 Standard Should Be Used;GB9948 Or GB6479 Standards Should Also Be Used For Pipelines Operating In The Presence Of Hydrogen, Or Pipelines That Are Prone To Stress Corrosion.All Carbon Steel Pipes Used At Low Temperatures (Less Than -20°C) Should Adopt The GB6479 Standard, Which Only Specifies The Requirements For Low Temperature Impact Toughness Of Materials.

GB3087 And GB5310 Standards Are Standards Specially Set For Boiler Steel Pipes. “Boiler Safety Supervision Regulations” Emphasizes That All Pipes Connected To Boilers Are Within The Scope Of Supervision, And The Application Of Their Materials And Standards Should Comply With The “Boiler Safety Supervision Regulations”. Therefore, Boilers, Power Plants, Heating And Petrochemical Production Equipment Use The Public Steam Pipelines (Supplied By The System) Should Adopt GB3087 Or GB5310 Standards.

It Is Worth Noting That The Price Of Steel Pipes With Good Quality Steel Pipe Standards Is Also Relatively High. For Example, The Price Of GB9948 Is Nearly 1/5 Higher Than That Of GB8163 Materials. Therefore, When Selecting Steel Pipe Material Standards, It Should Be Comprehensively Considered According To The Conditions Of Use. It Must Be Reliable And Reliable. To Be Economical. It Should Also Be Noted That Steel Pipes According To GB/T20801 And TSGD0001, GB3087 And GB8163 Standards Shall Not Be Used For GC1 Pipelines (Unless Ultrasonically, The Quality Is Not Lower Than L2.5 Level, And Can Be Used For GC1 With Design Pressure Not Greater Than 4.0Mpa (1) Pipeline).

Tianjin Sanon Steel Pipe Co., Ltd. is one professional enterprise that integrates pipe production, selling and exports. The company was founded in 1992. It covers an area of 0.1 million square meters.There are 520 employees, 3 of them are senior engineers, 12 of them engineers and 150 of them professional technical workers. The annual production capacity is more than 20,000 tons, and the pipe turnover is more than 50,000 tons.

original source:

Media Contact
Company Name: Tianjin Sanon Steel Pipe Co.,LTD.
Email: Send Email
Phone: 0086-22-58658800
Address:Floor 8. Jinxing Building, No 65 Hongqiao Area
City: Tianjin
Country: China

Related Articles